Power Windows System Description - Control/Function
Basic Operation
Auto Reverse Power Window Function
When some object is detected during the AUTO UP operation, the window stops closing and reverses about 70 mm (2.8 in). If the window is less than halfway opened (about 220 mm (8.66 in)), it will reverse to half open position (about 220 mm (8.66 in)). In manual operation, this function is active only during the vehicle OFF operation. This function is activated based on the calculation of the rotation speed and load change of the motor's pulse A. Vehicle OFF Operation Function
The vehicle OFF operation is controlled by the door multiplex control unit. During a certain period of time after the vehicle OFF (LOCK) mode, the window's open/close operation by the power window switches is available. Except Mexico Model and With Driver's Window AUTO UP/AUTO DOWN Function Only
Mexico Model or Without Driver's Window AUTO UP/AUTO DOWN Function Only
Keyless/Key Cylinder Operation
(Mexico Model or Without Driver's Window AUTO UP/AUTO DOWN Function Only) With the key inserted in the driver's door key cylinder, turn the key a second time and hold it (clockwise to open, counterclockwise to close). The windows and moonroof stop moving when the key is released. By pressing and holding the LOCK or the UNLOCK button on the remote, all power windows and the moonroof operate. By pressing and holding the UNLOCK button of the remote a second time, all power windows and the moonroof open. By pressing and holding the LOCK button of the remote a second time, all power windows and the moonroof close. All power windows and the moonroof stop moving when the LOCK/UNLOCK button is released.
|