Rearview Camera Connector for Inputs and Outputs (2-door)

Rearview Camera Connector for Inputs and Outputs

REARVIEW CAMERA 8P CONNECTOR

Cavity	Wire Color	Terminal Name	Description	Voltage (about)	Symptom
1	BLK	CAMERA VCC	Power source for rearview camera	Ignition switch ACCESSORY (I) or vehicle in ACC mode, in R: 8.0 V	If open/short: When shift lever is in R, the navigation screen goes black (guide line still display).
2	GRN	CAMERA V GND	Ground for video signal	0 V	If open: When shift lever is in R, the navigation screen goes black (guide line still display). If short to ground: No effect on system.
3	RED	CAMERA GND	Ground for rearview camera	0 V	If open: In R, the navigation screen goes black (guide line still display). If short to ground: No effect on system.
4	YEL	CAMERA BIT0	Mode select signal for rearview camera	0 - 7 V (depends on rearview mode)	If open/short: No change to rearview camera image.
5	WHT	CAMERA V	Outputs video signal to audio-navigation unit	1.0 V AC average	If open/short: When shift lever is in R, the navigation screen goes black (guide line still display).
6	LT BLU	CAMERA ADPT	Control signal for rearview camera	0 V	If open: No change to rearview camera image. If short to ground: No effect on system.
7	GRY	SH CAMERA	Shield for terminals No. 1, No. 3, No. 10, and No. 12	0 V	If open/short to ground: No effect on system.
8	PUR	CAMERA BIT1	Mode select signal for rearview camera	0 - 7 V (depends on rearview mode)	If open/short: No change to rearview camera image.