Ignition Coil and Spark Plug Removal and Installation
1. Ignition Coil Cover - Remove
Remove the ignition coil cover.


2. Ignition Coil - Remove
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (B).

3. Spark Plug - Remove
Remove the spark plugs.


1. Spark Plug - Install
Apply a small amount of anti-seize compound to the plug threads, and screw the plugs into the cylinder head, finger tight, then tighten the plugs to the specified torque.

Specified Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft)


2. Ignition Coil - Install
1.
Install the ignition coils (A).
2.
Connect the ignition coil connectors (B).

3. Ignition Coil Cover - Install
Install the ignition coil cover.


4. Maintenance Minder - Reset (With Maintenance Minder System)
1.
When the spark plugs are replaced, do the following procedure.
2.
If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder"). If the Maintenance Minder did not require to replace the spark plugs, reset the Maintenance Minder with the HDS (see "Resetting the Individual Maintenance Items").