Ignition Coil and Spark Plug Removal and Installation
1. Engine Cover - Remove
Remove the engine cover.


2. Ignition Coil - Remove

FRONT

REAR
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (B).

3. Spark Plug - Remove

FRONT

REAR
Remove the spark plugs.


1. Spark Plug - Install

FRONT

REAR
Apply a small amount of anti-seize compound to the plug threads, and screw the plugs into the cylinder head, finger tight, then tighten the plugs to the specified torque.

Specified Torque:
22 N·m (2.2 kgf·m, 16 lbf·ft)


2. Ignition Coil - Install

FRONT

REAR
1.
Install the ignition coils (A).
2.
Connect the ignition coil connectors (B).

3. Engine Cover - Install
Install the engine cover.


4. Maintenance Minder - Reset (With Maintenance Minder System)
1.
When the spark plugs are replaced, do the following procedure.
2.
If the Maintenance Minder required to replace the spark plugs, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder").