Pulley End Crankshaft Oil Seal Replacement - In Car
Special Tools Required
Image Description/Tool Number
3525664.png Oil Seal Driver, 64 mm 07OAD-RCAA100
1. Timing Belt Drive Pulley - Remove

Remove the timing belt drive pulley.

2. Pulley End Crankshaft Oil Seal - Remove
Remove the pulley end crankshaft oil seal.


3. Pulley End Crankshaft Oil Seal - Install
1.
Clean and dry the crankshaft oil seal housing.
2.
Apply a light coat of new engine oil to the lip of the crankshaft oil seal.
3.
Using the oil seal driver, 64 mm, drive in the new crankshaft oil seal (A) until the oil seal driver bottoms on the oil pump.

4.
Clean the excess oil off the crankshaft, and check that the oil seal lip is not distorted.

4. Timing Belt Drive Pulley - Install

Install the timing belt drive pulley.