Transmission End Crankshaft Oil Seal Replacement - In Car
Special Tools Required
Image Description/Tool Number
310169.png Driver Handle, 15 x 135L 07749-0010000
310263.png Oil Seal Driver Attachment, 96 mm 07ZAD-PNAA100
1. Transmission - Remove

Remove the transmission:

2. Pressure Plate - Remove (M/T)

Remove the pressure plate.

3. Clutch Disc - Remove (M/T)

Remove the clutch disc.

4. Flywheel - Remove (M/T)

Remove the flywheel.

5. Drive Plate - Remove (CVT)

Remove the drive plate.

6. Transmission End Crankshaft Oil Seal - Remove
Remove the transmission end crankshaft oil seal.


7. Transmission End Crankshaft Oil Seal - Install
1.
Clean and dry the crankshaft oil seal housing.
2.
Apply a light coat of new engine oil to the lip of the transmission end crankshaft oil seal.
3.
Using the driver handle, 15 x 135L and the oil seal driver attachment, 96 mm, to drive a new crankshaft oil seal (A) squarely into the engine block to the specified installed height.
4.
Measure the distance between the engine block (A) and the crankshaft oil seal (B).
Oil Seal Installed Height:
0.2?1.2 mm (0.008?0.047 in)

8. Drive Plate - Install (CVT)

Install the drive plate.

9. Flywheel - Install (M/T)

Install the flywheel.

10. Clutch Disc - Install (M/T)

Install the clutch disc.

11. Pressure Plate - Install (M/T)

Install the pressure plate.

12. Transmission - Install

Install the transmission: