Engine Oil Replacement
1. Engine - Warm Up

Allow the engine to reach operating temperature (fan comes on at least twice).

2. Vehicle - Lift

Raise and support the vehicle.

3. Engine Oil - Drain

K24W1 engine

J35Y1 engine
1.
Remove the drain bolt (A), and drain the engine oil.
2.
Reinstall the drain bolt with a new washer (B) and torque to specification.

4. Engine Oil - Refill

K24W1 engine

J35Y1 engine
Refill the engine with the recommended engine oil.

K24W1 engine:
Capacity
At Oil Change:
4.0 L (4.2 US qt)
At Oil Change including Filter:
4.2 L (4.4 US qt)
After Engine Overhaul:
5.4 L (5.7 US qt)

J35Y1 engine:
Capacity
At Oil Change:
4.0 L (4.2 US qt)
At Oil Change including Filter:
4.3 L (4.5 US qt)
After Engine Overhaul:
5.0 L (5.3 US qt)


5. Engine Oil Level - Check

Run the engine for more than 3 minutes, then check the oil level and the oil leakage.

6. Maintenance Minder - Reset (With Maintenance Minder System)

If the Maintenance Minder required to replace the engine oil, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder"). If the Maintenance Minder did not require to replace the engine oil, reset the Maintenance Minder with the HDS (see "Resetting the Individual Maintenance Items").