Brake Pedal Removal and Installation
1. Driver's Dashboard Undercover - Remove (If equipped)

Remove the driver's dashboard undercover.

2. Brake Pedal - Remove
1.
Disconnect the brake pedal position switch connector (A).
2.
Remove the wire harness clips (B).
3.
Remove the lock pin (C).
4.
Remove the clevis pin (D).
5.
Remove the brake pedal support member (E).
6.
Remove the brake pedal with the bracket (F).
7.
Remove the brake pedal position switch (G) by turning it 45 ° counterclockwise.

1. Brake Pedal - Install
1.
Install the brake pedal position switch (A) by turning it 45 ° clockwise.
2.
Install the brake pedal with the bracket (B).
3.
Install the brake pedal support member (C).
4.
Install the clevis pin (D).
NOTE: Apply multipurpose grease to the clevis pin in the brake pedal.
5.
Install the lock pin (E).
6.
Install the wire harness clips (F).
7.
Connect the brake pedal position switch connector (G).

2. Brake Pedal and Brake Pedal Position Switch - Adjust

Do the brake pedal and brake pedal position switch adjustment.

3. Driver's Dashboard Undercover - Install (If equipped)

Install the driver's dashboard undercover.