SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.
While lifting the glove box handle (A), pull out one end of the retainer (B) with a hook-shaped tool in its slot.
NOTE: Do not remove the retainer entirely. Leave one end of the retainer in its original position when removing the lock cylinder.
2.
Remove the glove box lock cylinder (A).
SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.
1.
Glove Box Lock Cylinder - Install
Install the end of the retainer (A) in its slot, then install the glove box lock cylinder (B). Push the cylinder into place securely until the retainer snaps into place.
