Pull away the door weatherstrip (A) and remove the clip (B).
NOTE: Take care not to damage the front corner clip because it is not available separately.
2.
Remove the screw (C).
3.
Pull out the upper edge of the front door outer molding (A) from the edge of the sash, and cut the double-sided adhesive tape (B) with a utility knife, then remove the molding from the sash.
1.
Front Door Outer Molding - Install
1.
Carefully remove the remaining double-sided adhesive tape from the sash, then clean the sash surface with a shop towel dampened with isopropyl alcohol.
2.
Install the new front door outer molding (A) with the double-sided adhesive tape (B).
3.
Install the screw (A).
4.
Install the clip (B) and the door weatherstrip (C).
