Pull away the rear edge of the door weatherstrip (A) and remove the clips (B).
2.
Remove the screw (C).
3.
Pull away the front edge of the door weatherstrip (A) and remove the clip (B).
4.
Remove the screw (C).
5.
Pull out the edge of the rear door outer molding (D) from the edge of the sash, and cut the double-sided adhesive tape (E) with a utility knife, then remove the molding from the sash.
1.
Rear Door Outer Molding - Install
1.
Carefully remove the remaining double-sided adhesive tape from the sash, then clean the sash surface with a shop towel dampened with isopropyl alcohol.
2.
Install the new rear door outer molding (A) with the double-sided adhesive tape (B).
3.
Install the screw (C) to the front edge of the door.
4.
Install the door weatherstrip (D) with the clip (E).
5.
Install the screw (A) to the rear edge of the door.
6.
Install the door weatherstrip (B) with the clips (C).
