Mirror Housing Cover Removal and Installation
Without Side Turn Signal Light

1. Power Mirror Actuator - Remove

Remove the power mirror actuator.

2. Mirror Housing Cover - Remove
1.
Remove the screws (A) with a TORX T15 bit.
2.
Remove the mirror housing (B) from the mirror bracket (C).
3.
Remove the mirror housing cover (A) from the mirror housing (B).

With Side Turn Signal Light

1. Mirror Holder - Remove

Remove the mirror holder.

2. Mirror Housing Cover - Remove

Driver's side

Passenger's side
1.
Remove the screws (A) with a TORX T15 bit.
2.
Remove the visor (B) and the mirror housing cover (C).
3.
Disconnect the side turn signal light connector (D).
4.
With LaneWatch: Disconnect the LaneWatch camera connector (E).

Without Side Turn Signal Light

1. Mirror Housing Cover - Install
1.
Install the mirror housing cover (A) to the mirror housing (B).
2.
Install the mirror housing (A) to the mirror bracket (B).
3.
Install the screws (C) with a TORX T15 bit.

2. Power Mirror Actuator - Install

Install the power mirror actuator.

With Side Turn Signal Light

1. Mirror Housing Cover - Install

Driver's side

Passenger's side
1.
Connect the side turn signal light connector (A).
2.
With LaneWatch: Connect the LaneWatch camera connector (B).
3.
Install the visor (C) and the mirror housing cover (D).
4.
Install the screws (E) with a TORX T15 bit.

2. Mirror Holder - Install

Install the mirror holder.

3. LaneWatch - Aim Camera

With LaneWatch: If you replace or remove the passenger's mirror, do the LaneWatch camera aiming.