Dust and Pollen Filter Removal and Installation
1. Glove Box - Lower
1.
Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
2.
Lower the glove box (A).

2. Dust and Pollen Filter - Remove
1.
Remove the lid (A).
2.
Pull out the dust and pollen filter (B).

1. Dust and Pollen Filter - Install
NOTE: Make sure there is no air leaking out of the blower unit.
1.
Install the dust and pollen filter (A).
2.
Install the lid (B).

2. Glove Box - Install
Install the glove box (A).


3. Maintenance Minder - Reset (With Maintenance Minder System)

If the Maintenance Minder required to replace the dust and pollen filter, reset the Maintenance Minder with the gauge (see "Resetting the Maintenance Minder"). If the Maintenance Minder did not require to replace the dust and pollen filter, reset the Maintenance Minder with the HDS (see "Resetting the Individual Maintenance Items").