Blower Power Transistor Removal and Installation

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. Glove Box - Remove

Remove the glove box.

2. Passenger's Heater Duct - Remove
1.
Remove the harness clips (A).
2.
Remove the passenger's heater duct (B).

3. Power Transistor - Remove
1.
Disconnect the power transistor connector (A).
2.
Remove the power transistor (B).


SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.

1. Power Transistor - Install
1.
Install the power transistor (A).
2.
Connect the power transistor connector (B).

2. Passenger's Heater Duct - Install
1.
Install the passenger's heater duct (A).
2.
Install the harness clips (B).

3. Glove Box - Install

Install the glove box.