Brake Pedal Position Switch Test
1.
Driver's Dashboard Undercover - Remove
Remove the driver's dashboard undercover
.
2.
Brake Pedal Position Switch - Test
1.
Disconnect the brake pedal position switch connector.
2.
Check for continuity between the terminals in each switch position according to the table.
3.
If the test results are not as specified,
adjust the brake pedal position switch
(A), then recheck. If the results are still not as specified,
replace the brake pedal position switch
.
4.
Connect the brake pedal position switch connector.
3.
Driver's Dashboard Undercover - Install
Install the driver's dashboard undercover
.
