Interior Light Switch Removal, Installation, and Test
NOTE: The interior light switch is built into the moonroof switch.
1.
Front Individual Map Light - Remove
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect these connectors:
Front individual map light connector
Moonroof switch connector
2.
Moonroof Switch - Remove
Remove the moonroof switch (A) from the front individual map light (B).
1.
Interior Light Switch - Test
NOTE: The interior light switch (A) is built into the moonroof switch (B), and it switches the front individual map light OFF and DOOR positions
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified the interior light switch is faulty; replace the moonroof switch assembly.
NOTE: The interior light switch is built into the moonroof switch.
1.
Moonroof Switch - Install
Install the moonroof switch (A) to the front individual map light (B).
2.
Front Individual Map Light - Install
1.
Connect these connectors:
Front individual map light connector
Moonroof switch connector
2.
Install the front individual map light (A).
3.
Carefully install the lenses (B).
