Front Individual Map Light Test - Honda Accord CR/CT 2012-2017

1.	Front Individual Map Light - Remove

1.

Turn the front individual map light switch OFF.

2.

Carefully pry off the lenses (A).

3.

Remove the front individual map light (B).

4.

Disconnect these connectors:

Front individual map light connector

Ambient light connector (without moonroof)

Moonroof switch connector (with moonroof)

2.	Front Individual Map Light - Test

NOTE: When doing the front individual map light test, make sure to install the bulbs correctly.

1.

Check for continuity between the terminals in each switch position according to the table.

2.

If the continuity is not as specified, replace the bulb(s) or the front individual map light (A).

3.	Front Individual Map Light - Install

1.

Connect these connectors:

Front individual map light connector

Ambient light connector (without moonroof)

Moonroof switch connector (with moonroof)

2.

Install the front individual map light (A).

3.

Carefully install the lenses (B).