Ceiling Light Removal, Installation, and Test
1.
Ceiling Light - Remove
1.
Turn the ceiling light switch OFF.
2.
Carefully pry off the lens (A).
3.
Remove the ceiling light (B).
4.
Disconnect the ceiling light connector.
5.
Remove the bulb (C).
1.
Ceiling Light - Test
NOTE: When doing the ceiling light test, make sure to install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb or the ceiling light (A).
1.
Ceiling Light - Install
1.
Install the bulb (A) to the ceiling light (B).
2.
Connect the ceiling light connector.
3.
Install the ceiling light.
4.
Carefully install the lens (C).
