Keyless Access Control Unit Removal and Installation
1. Driver's Dashboard Lower Cover - Remove

Remove the driver's dashboard lower cover.

2. Keyless Access Control Unit - Remove
1.
Remove the harness clip (A).
2.
Remove the junction box clip (B).
3.
Disconnect the keyless access control unit connectors.
4.
Remove the keyless access control unit (C) from the steering hanger beam.
5.
Remove the keyless access control unit (A) from the bracket (B).


NOTE: If the keyless access control unit is replaced, do the keyless access registration. If the original keyless access control unit is installed, confirm that all systems work properly.

1. Keyless Access Control Unit - Install
1.
Install the keyless access control unit (A) to the bracket (B).
2.
Install the keyless access control unit (A) to the steering hanger beam.
3.
Connect the keyless access control unit connectors.
4.
Install the junction box clip (B).
5.
Install the harness clip (C).

2. Driver's Dashboard Lower Cover - Install

Install the driver's dashboard lower cover.

3. Keyless Access System - Register

After replacement, register the keyless access control unit.