Washer Fluid Level Switch Removal, Installation, and Test
1. Right Front Inner Fender - Remove

Remove the right front inner fender (A) as needed.

2. Washer Fluid Level Switch - Remove
1.
Disconnect the washer fluid level switch connector.
2.
Remove the washer fluid level switch (A).
NOTE: Fluid may flow out of the opening.

1. Washer Fluid Level Switch - Test
1.
Check the washer fluid level switch according to the table.
2.
If the continuity is not as specified, replace the washer fluid level switch (A).

1. Washer Fluid Level Switch - Install
1.
Install the washer fluid level switch (A).
2.
Connect the washer fluid level switch connector.

2. Right Front Inner Fender - Install

Install the right front inner fender.