Washer Motor Test
1.
Right Front Inner Fender - Remove
Remove the right front inner fender as needed
.
2.
Windshield Washer Motor - Test
A Type
B Type
1.
Disconnect the windshield washer motor connector.
2.
Test the washer motor by connecting battery power to terminal No. 1 and ground to terminal No. 2 of the washer motor. The motor should run.
If the washer motor does not run or fails to run smoothly,
replace the windshield washer motor
(A).
If the washer motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged washer motor outlet.
3.
Right Front Inner Fender - Install
Install the right front inner fender
.
