Multi-Information Display Lens Removal and Installation

NOTE:
Do this procedure in a clean place free from dirt.
Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).
When removing the lens, do not touch the LCD face.
If there is dirt on the LCD face, clean it using compressed air.

1. Multi-Information Display Unit - Remove

Remove the multi-information display unit.

2. Multi-Information Display Lens - Remove
Remove the multi-information display lens (A) from the TFT module (B).



NOTE:
Do this procedure in a clean place free from dirt.
Wear latex or vinyl gloves when doing this procedure (Do not use fabric gloves).
If there is dirt on the LCD face, clean it using compressed air.
When installing the lens onto the TFT module, be careful not to touch the LCD face.
Check that the lens and the TFT module are properly installed.
Since the TFT module and the lens are installed at an angle, be sure that the screws are properly seated.

1. Multi-Information Display Lens - Install
Install the multi-information display lens (A) to the TFT module (B).


2. Multi-Information Display Unit - Install

Install the multi-information display unit.