Moonroof Switch Removal, Installation, and Test
1.
Front Individual Map Light - Remove
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect these connectors:
Front individual map light connector
Moonroof switch connector
2.
Moonroof Switch - Remove
Remove the moonroof switch (A) from the front individual map light (B).
3.
Moonroof Switch Bulb - Remove
1.
Remove the cover (A).
2.
Turn the bulb (B) 45 ° counterclockwise to remove it.
1.
Moonroof Switch - Test
NOTE: When doing the moonroof switch test, install the bulb correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb or moonroof switch assembly (A).
1.
Moonroof Switch Bulb - Install
1.
Turn the bulb (A) 45 ° clockwise to install it.
2.
Install the cover (B).
2.
Moonroof Switch - Install
Install the moonroof switch (A) to the front individual map light (B).
3.
Front Individual Map Light - Install
1.
Connect these connectors:
Front individual map light connector
Moonroof switch connector
2.
Install the front individual map light (A).
3.
Carefully install the lenses (B).
