A/T Differential Carrier Bearing Replacement
Special Tools Required
Image Description/Tool Number
609772.png Installer Attachment, 45 x 55 mm 07MAD-PR90100

NOTE:
The carrier bearing and the carrier bearing outer race should be replaced as a set.
Inspect and adjust the carrier bearing preload whenever the bearing is replaced.
Check the bearing for wear and rough rotation. If the bearing is OK, removal is not necessary.

1. Carrier Bearing - Remove
Remove the carrier bearing (A) using a commercially available bearing puller (B), a bearing separator (C), and a spacer (D).


2. Carrier Bearing - Install
Install the carrier bearing (A) until it bottoms using the 45 x 55 mm installer attachment and a press.