Transmission Fluid Pressure Switch C (4th Clutch) Removal and Installation
1.
Vehicle - Lift
Raise and support the vehicle
.
2.
Engine Undercover - Remove
Remove the engine undercover
.
3.
Transmission Fluid Pressure Switch C (4th Clutch) - Remove
1.
Disconnect the transmission fluid pressure switch C (4th clutch) connector (A).
2.
Remove transmission fluid pressure switch C (4th clutch) with the sealing washer (A).
NOTE: Loosen the switch by gripping the metal part, not the plastic part.
1.
Transmission Fluid Pressure Switch C (4th Clutch) - Install
1.
Install transmission fluid pressure switch C (4th clutch) using a new sealing washer (A).
NOTE: Tighten the switch by gripping the metal part, not the plastic part.
2.
Connect the transmission fluid pressure switch C (4th clutch) connector (A) securely.
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
2.
Engine Undercover - Install
Install the engine undercover
.
3.
ATF - Level Check
Check the ATF level
.
