Transmission Fluid Pressure Switch E (6th Clutch) Removal and Installation
1.
Air Cleaner - Remove
Remove the air cleaner
.
2.
Transmission Fluid Pressure Switch E (6th Clutch) - Remove
1.
Disconnect the transmission fluid pressure switch E (6th clutch) connector (A).
2.
Remove transmission fluid pressure switch E (6th clutch) with the sealing washer (A).
NOTE: Loosen the switch by gripping the metal part, not the plastic part.
1.
Transmission Fluid Pressure Switch E (6th Clutch) - Install
1.
Install transmission fluid pressure switch E (6th clutch) using a new sealing washer (A).
NOTE: Tighten the switch by gripping the metal part, not the plastic part.
2.
Connect the transmission fluid pressure switch E (6th clutch) connector (A) securely.
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
2.
ATF - Level Check
Check the ATF level
.
3.
Air Cleaner - Install
Install the air cleaner
.
