ATF Temperature Sensor Removal and Installation
1. Vehicle - Lift

Raise and support the vehicle.

2. Engine Undercover - Remove

Remove the engine undercover.

3. ATF - Drain
1.
Remove the drain plug (A).
2.
Drain the ATF.
3.
Reinstall the drain plug using a new sealing washer (B).

4. ATF Temperature Sensor - Remove
1.
Disconnect the ATF temperature sensor connector (A).
2.
Remove the ATF temperature sensor (A) with the O-ring (B).

1. ATF Temperature Sensor - Install
1.
Install the ATF temperature sensor (A) using a new O-ring (B).
2.
Connect the ATF temperature sensor connector (A) securely.
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

2. Engine Undercover - Install

Install the engine undercover.