Clutch Clearance Inspection
Special Tools Required
Image Description/Tool Number
310264.png Clutch Compressor Attachment 07ZAE-PRP0100
1. Clutch Clearance - Inspect
1.
Set a dial indicator (A) on the clutch end-plate (B).
2.
Zero the dial indicator with the clutch end-plate lifted up to the snap ring (C).
3.
Release the clutch end-plate to lower it, then put the clutch compressor attachment on the end-plate (A).
4.
Press the clutch compressor attachment down with 147.1 N (15.00 kgf, 33.07 lbf) (the weight of the clutch compressor attachment is included) (B) using a force gauge or equivalent, and read the dial indicator (C).
5.
The dial indicator reads the clearance (D) between the clutch end-plate and the top disc (E). Take measurements in at least three places, and use the average as the actual clearance.
Clearance Between Clutch End-Plate and Top Disc
 
Standard:
   
1st Clutch:
1.50?1.70 mm (0.0591?0.0669 in)
   
2nd Clutch:
1.25?1.45 mm (0.0492?0.0571 in)
   
3rd Clutch:
1.25?1.45 mm (0.0492?0.0571 in)
   
4th Clutch:
1.50?1.70 mm (0.0591?0.0669 in)
   
5th Clutch:
1.25?1.45 mm (0.0492?0.0571 in)
   
6th Clutch:
1.25?1.45 mm (0.0492?0.0571 in)
6.
If the measurement is out of the standard, replace faulty clutch assembly.