Torque Converter Housing Idler Gear Shaft Bearing Replacement
Special Tools Required
Image
Description/Tool Number
Bearing Driver Attachment, 52 x 55 mm 07746-0010400
Driver Handle, 15 x 135L 07749-0010000
Remover Handle 07936-3710100
Slide Hammer 07936-371020A
Bearing Remover, 25 mm 07936-ZV1A100
1.
Idler Gear Shaft Bearing - Remove
1.
Remove the idler gear shaft bearing (A) using the 25 mm bearing remover, the remover handle, and the slide hammer.
NOTE: Be careful not to damage the ATF guide plate (B) when setting the tip (C) of the 25 mm bearing remover shaft.
2.
Remove the ATF guide plate (A), and replace it if it is damaged.
2.
Idler Gear Shaft Bearing - Install
1.
Install the ATF guide plate (A).
2.
Install the idler gear shaft bearing (A).
3.
Drive the idler gear shaft bearing until it bottoms using the 15 x 135L driver handle and the 52 x 55 mm bearing driver attachment.
