Torque Converter Housing Selector Control Shaft Bearing Replacement
Special Tools Required
Image
Description/Tool Number
Bearing Driver Attachment, 32 x 35 mm 07746-0010100
Driver Handle, 15 x 135L 07749-0010000
Bearing Remover Shaft Set, 15 mm 07936-KC10500
Slide Hammer 07936-371020A
1.
Selector Control Shaft Bearing - Remove
Remove the selector control shaft bearing (A) using the 15 mm bearing remover shaft and the slide hammer.
2.
Selector Control Shaft Bearing - Install
Install the selector control shaft bearing until it bottoms using the 15 x 135L driver handle and the 32 x 35 mm bearing driver attachment.
