Torque Converter Housing Differential Carrier Bearing Outer Race Replacement
Special Tools Required
Image Description/Tool Number
310169.png Driver Handle, 15 x 135L 07749-0010000
1161307.png Attachment, 83 mm 07HAD-SG00100

NOTE:
Replace the carrier bearing with a new one whenever the bearing outer race is replaced.
Adjust the preload after replacing the bearing and the outer race.
Coat all parts with ATF during installation.

1. Differential Carrier Bearing Outer Race - Remove
Remove the carrier bearing outer race (A) and the spacer (B).


2. Differential Carrier Bearing Outer Race - Install
1.
Install the spacer (A) by aligning the tab (B) with the groove (C).
2.
Install the carrier bearing outer race (D).
3.
Drive the bearing outer race securely using the 15 x 135L driver handle and the 83 mm attachment.