Transmission Housing Idler Gear Shaft Bearing Replacement
Special Tools Required
Image Description/Tool Number
457221.png Bearing Driver Attachment, 37 x 40 mm 07746-0010200
310169.png Driver Handle, 15 x 135L 07749-0010000
310176.png Remover Handle 07936-3710100
3247746.png Slide Hammer 07936-371020A
4742290.png Bearing Remover Shaft Set, 22 mm 070MC-MFR0100
1. Idler Gear Shaft Bearing - Remove
1.
Heat the transmission housing to about 212 °F (100 °C) using a heat gun (A).
NOTE: Do not heat the transmission housing more than 212 °F (100 °C).
2.
Remove the idler gear shaft bearing (A) using the 22 mm bearing remover shaft, the remover handle, and the slide hammer.

2. Idler Gear Shaft Bearing - Install
Install the idler gear shaft bearing until it bottoms using the 15 x 135L driver handle and the 37 x 40 mm bearing driver attachment.