TPMS Switch Removal, Installation, and Test
1. Driver's Dashboard Undercover - Remove (If equipped)

Remove the driver's dashboard undercover.

2. TPMS Switch - Remove
1.
Push out the TPMS switch (A) from the back of the driver's dashboard lower cover (B).
2.
Disconnect the TPMS switch connector (C).

1. TPMS Switch - Test
1.
On the switch side, check for continuity between the connector terminals in each switch position according to the table.
2.
If the switch does not work as described in the table, replace the switch.

1. TPMS Switch - Install
1.
Connect the TPMS switch connector (A).
2.
Install the TPMS switch (B) to the driver's dashboard lower cover (C).

2. Driver's Dashboard Undercover - Install (If equipped)

Install the driver's dashboard undercover.