ELD Removal and Installation
1. Battery Terminal - Disconnect

Do the battery terminal disconnection procedure.

2. ELD - Remove
1.
Remove the under-hood fuse/relay box upper cover (A).
2.
Remove the fuses (B and C).
3.
Release the two lock tabs, and carefully remove the ELD (D) with the busbar (E), then disconnect the ELD connector (F).
NOTE: Take care not to damage the wire harness.

1. ELD - Install
1.
Connect the ELD connector (A) to the ELD (B), and install the ELD with the busbar (C).
NOTE: Make sure the connector is firmly locked into place.
2.
Install the fuses (D and E)
3.
Install the under-hood fuse/relay box upper cover (F).

2. Battery Terminal - Connect

Do the battery terminal reconnection procedure.