Fuel Pressure Test
Special Tools Required
Image Description/Tool Number
310146.png Fuel Pressure Gauge 07406-004000B
310189.png Fuel Pressure Gauge Attachment Set 07AAJ-S6MA150
1. Fuel Pressure - Relieve

Relieve the fuel pressure.

2. Fuel Pressure - Test
NOTE: If you were referred to this procedure from a troubleshooting procedure, test the fuel pressure under the same conditions the malfunction occurred (engine rpm, load, throttle position, etc.).
1.
Disconnect the quick-connect fitting and attach the fuel pressure gauge set. Check for leaks with the gauge set attached.
2.
Start the engine, and let it idle.
If the engine starts, go to step 3 and read the fuel pressure gauge.
If the pump does not run, do the fuel pump circuit troubleshooting.
3.
Read the fuel pressure gauge. The pressure should be
390?440 kPa (4.0?4.5 kgf/cm2, 57?64 psi).
If the pressure is OK, the test is complete.
If the pressure is out of specification, replace the fuel pressure regulator and the fuel filter, then recheck the fuel pressure.