Tuner Unit Removal and Installation

NOTE: If you are replacing the tuner unit, write down the AM/FM radio presets (if possible), and enter them into the new tuner unit.

1. Trunk Rear Side Trim Panel - Remove


2. Tuner Unit - Remove


1.
Disconnect the tuner unit connectors.

2.
Remove the tuner unit (A).


NOTE: If you are replacing the tuner unit, write down the AM/FM radio presets (if possible), and enter them into the new tuner unit.

1. Tuner Unit - Install


1.
Install the tuner unit (A).

2.
Connect the tuner unit connectors.

2. Trunk Rear Side Trim Panel - Install