Disconnect the back-up light switch connector (A).
2.
Remove the harness clamp (B).
3.
Remove the back-up light switch (A).
1.
Back-Up Light Switch - Install
1.
Clean any dirt and oil from the sealing surface of the back-up light switch and the transmission housing.
2.
Apply liquid gasket (P/N 08718-0004 or 08718-0009) to the threads of the back-up light switch (A). Install the back-up light switch within 5 minutes of applying the liquid gasket.
NOTE:
If you apply liquid gasket P/N 08718-0012, the component must be installed within 4 minutes.
If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
