Front Driveshaft Dynamic Damper Removal and Installation
1. Inboard Joint - Remove

Remove the inboard joint.

2. Dynamic Damper Band - Remove

Remove the dynamic damper band.

3. Dynamic Damper - Remove

M/T

CVT
Remove the dynamic damper (A).


1. Dynamic Damper - Install

M/T

CVT
1.
Install the dynamic damper (A).
NOTE: Be careful not to swap the dynamic dampers. Check the type of the dynamic damper by its shape.




M/T

CVT
2.
Adjust the specified length (A) between the outboard joint side and the dynamic damper edge.
NOTE: Check the type of the dynamic damper by its shape.
Dynamic damper position:
Type
Left/Right driveshaft
Specified length (A)
M/T
Left
297.5?302.5 mm
(11.713?11.909 in)
Right
282.5?287.5 mm
(11.122?11.319 in)
CVT
Left
306?311 mm
(12.05?12.24 in)
Right
279.5?284.5 mm
(11.004?11.201 in)

2. Dynamic Damper Band - Install

Install a new dynamic damper band.

3. Inboard Joint - Install

Install the inboard joint.