Adjust the washer nozzles by gently gripping, and then moving, the outside of each nozzle (A).
Do not insert tools into the nozzle hole (B), as it may cause the washer fluid to spray incorrectly.
Wiper Arms Auto-Stop Position
1.
Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then turn the wiper switch ON, and then back OFF.
2.
When the wiper arms stop at the auto-stop position, make sure that they are at the correct position.
a: Position at about 39.3 mm (1.547 in) from the top of the cowl cover (C).
b: Position at about 29 mm (1.14 in) from the top of the cowl cover (C).
Washer Nozzle Position
3.
When you turn on the washer, make sure 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzle(s).
d: Position at about 186.2 mm (7.331 in) from the windshield center line (D).
e: Position at about 190.7 mm (7.508 in) from the windshield center line (D).
f: Position at about 161.6 mm (6.362 in) from the top of the black ceramic area (E) at the lower windshield.
g: Position at about 158.1 mm (6.224 in) from the top of the black ceramic area (E) at the lower windshield.
4-door
1.
Wiper Arm/Nozzle - Adjustment
Adjust the washer nozzles by gently gripping, and then moving, the outside of each nozzle (A).
Do not insert tools into the nozzle hole (B), as it may cause the washer fluid to spray incorrectly.
Wiper Arms Auto-Stop Position
1.
Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then turn the wiper switch ON, and then back OFF.
2.
When the wiper arms stop at the auto-stop position, make sure that they are at the correct position.
a: Position at about 44.2 mm (1.740 in) from the top of the cowl cover (C).
b: Position at about 29 mm (1.14 in) from the top of the cowl cover (C).
Washer Nozzle Position
3.
When you turn on the washer, make sure 50 % or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzle(s).
d: Position at about 275 mm (10.83 in) from the windshield center line (D).
e: Position at about 138.7 mm (5.461 in) from the top of the black ceramic area (E) at the lower windshield.
f: Position at about 141.5 mm (5.571 in) from the top of the black ceramic area (E) at the lower windshield.
