Remove the control arm mounting self-locking nut (A) and the washer (B).
2.
Mark the cam positions of the adjusting bolt (C) and the adjusting cam plate (D) with the frame.
3.
Remove the self-locking nut (E), the adjusting cam plate, and the adjusting bolt.
4.
Remove the control arm (F).
1.
Control Arm - Install
1.
Position the control arm (A).
2.
Loosely install the new self-locking nut (B), the adjusting cam plate (C), and the new adjusting bolt (D).
NOTE: Align the cam positions of the adjusting bolt and the adjusting cam plate with the marked positions on the frame when tightening the self-locking nut.
3.
Loosely install the new control arm mounting self-locking nut (E) and the washer (F).
2.
Bolt and Nut - Tighten Under Vehicle’s Weight
1.
Load the suspension with the vehicle’s weight.
2.
Tighten all loosely installed mounting hardware to the specified torque.
