Solenoid Wire Harness A Removal and Installation
NOTE: Keep all foreign particles out of the transmission.
1.
Engine Undercover - Remove
Remove the engine undercover
.
2.
Solenoid Wire Harness A Connector - Disconnect
Disconnect the solenoid wire harness A connector (A).
NOTE: To prevent damage, cover the solenoid wire harness A connector (B) using a shop towel.
3.
Lower Valve Body Assembly - Remove
Remove the lower valve body assembly
.
4.
Solenoid Wire Harness A - Remove
Remove solenoid wire harness A with the O-ring (B).
NOTE: Keep all foreign particles out of the transmission.
1.
Solenoid Wire Harness A - Install
Install solenoid wire harness A using a new O-ring (B).
NOTE: Install solenoid wire harness A vertically to prevent damaging the O-ring.
2.
Lower Valve Body Assembly - Install
Install the lower valve body assembly
. Do not install the engine undercover.
3.
Solenoid Wire Harness A Connector - Connect
Connect the solenoid wire harness A connector (A).
NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.
4.
Engine Undercover - Remove
Remove the engine undercover
.
