Solenoid Wire Harness B Removal and Installation
1.
Lower Valve Body Assembly - Remove
2.
Solenoid Wire Harness B - Remove
Clutch Reducing Valve Body Side
Secondary Valve Body Side
1.
Disconnect these connectors:
CVT driven pulley control solenoid valve connector (A)
CVT drive pulley control solenoid valve connector (B)
CVT clutch pressure control solenoid valve connector (C)
CVT lock-up clutch control solenoid valve connector (D)
2.
Remove the ground terminals (E).
3.
Remove the solenoid wire harness B connector (F).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
