Exterior Lights Bulb Removal and Installation
Left Side Headlight (High Beam) (Without LED Headlight)

2. Headlight (High Beam) Bulb - Remove
1.
Disconnect the headlight (high beam) connector.
2.
Turn the bulb (A) 45 ° counterclockwise to remove it from the housing.

Right Side Headlight (High Beam) (Without LED Headlight)

1. Coolant Reservoir - Remove
Remove the coolant reservoir (A).


2. Headlight (High Beam) Bulb - Remove
1.
Disconnect the headlight (high beam) connector.
2.
Turn the bulb (A) 45 ° counterclockwise to remove it from the housing.

Headlight (Low Beam) (Without LED Headlight)

1. Headlight (Low Beam) Bulb - Remove
1.
Disconnect the headlight (low beam) connector.
2.
Turn the bulb (A) 45 ° counterclockwise to remove it from the housing.

Front Side Marker Light (With LED Headlight)

1. Front Inner Fender - Remove

Remove the right front inner fender as needed.

2. Front Side Marker Light Bulb - Remove
1.
Disconnect the front side marker light connector.
2.
Turn the bulb socket (A) 45 ° counterclockwise to remove it from the housing.
3.
Remove the bulb (B) from the bulb socket.

Front Turn Signal/Side Marker Light /Front Parking Light (Without LED Parking Light)

1. Front Turn Signal/Side Marker Light/Front Parking Light Bulb - Remove
1.
Disconnect the front turn signal light connector.
2.
Turn the bulb socket (A) 45 ° counterclockwise to remove it from the housing.
3.
Remove the bulb (B) from the bulb socket.

Rear Turn Signal Light

1. Trunk Rear Side Trim Panel - Remove

Remove the trunk rear side trim panel as needed.

2. Rear Turn Signal Light Bulb - Remove
1.
Disconnect the rear turn signal light connector.
2.
Turn the bulb socket (A) 45 ° counterclockwise to remove it from the housing.

3.
Remove the bulb (B) from the bulb socket.

Back-Up Light

1. Trunk Lid Trim Panel - Remove

Remove the trunk lid trim panel as needed.

2. Back-Up Light Bulb - Remove
1.
Disconnect the back-up light connector.
2.
Turn the bulb socket (A) 45 ° counterclockwise to remove it from the housing.
3.
Remove the bulb (B) from the bulb socket.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.