Rear Bumper Removal and Installation
1.
Rear Bumper - Remove
2-door
4-door
1.
Remove the bolts (A), the screws (B), and the clips (C).
2-door
4-door
2.
Pull out the rear bumper (A) at the wheel arch area to release it from the hooks (B) on the side spacer.
3.
Pull out the rear bumper (A) to release it from the hooks (B) on the side bracket.
2-door
4-door
4.
With the help of an assistant, pull out the rear bumper (A) to release it from the hooks (B) on the upper brackets.
5.
2-door: Disconnect the connectors (C).
6.
For some models: Disconnect the connector(s) (D).
7.
2-door: If necessary, remove the rear bumper absorber (A).
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
