Rear Seat Removal and Installation
Rear Seat Cushion

1. Rear Seat Cushion - Remove
1.
Remove the bolt (A).
2.
While pushing down on the rear seat cushion (A), pull the seat hook handles (B) to release the hooks (C).
3.
Disconnect the connector (D) (for some models).
4.
Remove the rear seat cushion.

2. Rear Seat Cushion Clip - Remove
1.
If necessary, release the hooks (A).
2.
Remove the rear seat cushion clip (B).

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: First install the seat belt buckles (A) into the slits (B) from under the rear seat cushion (C), then slip the rear center seat belt (D) and the rear center seat belt buckle (E) through the slits.

Rear Seat Side Bolster

1. Rear Seat Cushion - Remove


2. Rear Seat Side Bolster - Remove
1.
Remove the bolt (A) securing the rear seat side bolster (B).
2.
Lift up the rear seat side bolster (A) to release the hook (B), then remove it.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Rear Seat-Back

1. Rear Seat-Back - Remove
Left Rear Seat-Back
1.
Fold down the left rear seat-back (A).
2.
Remove the clip (B).
3.
Release the hook and loop fasteners (A).
4.
Turn over the left rear seat-back cover (B), then remove the bolts (C).
5.
Remove the left rear seat-back (D).
6.
Remove the center bracket (A).
7.
If necessary, remove the bushing (B).
Right Rear Seat-Back
1.
Fold down the right rear seat-back (A).
2.
Remove the clips (B).
3.
Pull out the rear center seat belt (A) through the slit in the rear center seat belt guide (B).
4.
Release the hook and loop fastener (C).
5.
Turn over the right rear seat-back cover (D).
6.
Remove the bolt (E) securing the right rear seat-back (F).
7.
Extend the rear center seat belt (A).
8.
Remove the right rear seat-back (B).

2. Bushing - Remove
1.
If necessary, remove the bushing (A).

3. Rear Seat Center Pivot Bracket Cover - Remove
1.
If necessary, remove the rear seat center pivot bracket cover (A).

4. Rear Seat Outer Pivot Bracket - Remove
1.
If necessary, remove the rear seat side bolster.
2.
Remove the rear seat outer pivot bracket (A).

5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.