Side Sill Panel Removal and Installation
1.
Side Sill Panel - Remove
1.
Remove the clips (A, B, and C).
2.
Slide the side sill panel (A) frontward to remove it.
NOTE: The clips will stay in the body.
3.
Remove the clips B, C, and E from the body.
4.
Remove the clips D, F from the body by turning them 45°.
1.
Side Sill Panel - Install
1.
Install the clips (A, B, C, D, and E) to the side sill panel (F).
2.
Clean the body bonding surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
3.
Align the clips of the side sill panel with the body holes.
4.
Press the exposed adhesive area of the side sill panel against the body.
5.
Install the clips (A, B, and C).
