Millimeter Wave Radar Removal and Installation
1. Millimeter Wave Radar Cover - Remove

2. Millimeter Wave Radar Assembly - Remove
NOTE: Do not disassemble the millimeter wave radar.
1.
Disconnect the connector (A).
2.
Remove the millimeter wave radar assembly (B).
Millimeter wave radar main bracket removal
3.
Remove the screws (A).
4.
Remove the millimeter wave radar (C) from the main bracket (D).
5.
If necessary, remove these items:
Spacer B
Aiming bolt (E)
Grip (F)

3. Millimeter Wave Radar Bracket - Remove (if necessary)

2.
Remove the clips (A) and the bolt (B).
3.
Remove the millimeter wave radar bracket (A).

4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: After installing the millimeter wave radar, measure the clearance 24.7 mm (0.972 in) between the millimeter wave radar and its bracket.
If the clearance is out of the standard, adjust the aiming bolt.