DTC Troubleshooting: P062F
DTC P062F: PCM Internal Control Module Keep Alive Memory (KAM) Error
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) Error
      

1.
Problem verification:

Problem verification
?1.
Press the engine start/stop button to select the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) ErrorR
      

Is DTC P062F indicated?

     
YES
     
     
     
The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM, then do the repair verification.
     
NO
     
     
     
Intermittent failure, the system is OK at this time.?
Repair verification:

?1.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P062F PCM Internal Control Module Keep Alive Memory (KAM) Error
      


Is DTC P062F indicated?

     
YES
     
     
     
If the PCM was updated, substitute a known-good PCM, then recheck. If the PCM was substituted, go to step 1.
     
NO
     
     
     
Troubleshooting is complete. If the PCM was substituted, replace the original PCM. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.?