DTC Troubleshooting: P1109
DTC P1109: BARO Sensor Circuit Out of Range
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P1109 BARO Sensor Circuit Out of Range
      

1.
Problem verification:

Problem verification
?1.
Turn the ignition switch to ON (II).

?2.
Clear the DTC with the HDS.


?3.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P1109 BARO Sensor Circuit Out of Range
      

Is DTC P1109 indicated?

     
YES
     
     
     
The failure is duplicated. Update the PCM if it does not have the latest software, or substitute a known-good PCM, then do the repair verification.
     
NO
     
     
     
Intermittent failure, the system is OK at this time.?
Repair verification:

?1.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P1109 BARO Sensor Circuit Out of Range
      


Is DTC P1109 indicated?

     
YES
     
     
     
If the PCM was updated, substitute a known-good PCM, then recheck. If the PCM was substituted, go to step 1.
     
NO
     
     
     
If the PCM was updated, troubleshooting is complete. If the PCM was substituted, replace the original PCM. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.?