DTC Troubleshooting: P145C
DTC P145C: EVAP System Purge Flow Malfunction
NOTE:
Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information.
If DTC P145C is indicated alone, do the troubleshooting for DTC P0496 and P0497 using the freeze data for P145C.
If DTC P0497 and P145C are stored at the same time, check for a poor connection, a blockage, or damage at the EVAP canister purge line between the EVAP canister purge valve and the EVAP canister. Also check for a stuck closed EVAP canister purge valve.
If any of the DTCs listed below are indicated at the same time as DTC P145C, troubleshoot those DTCs first, then recheck for P145C.
?
P0496, P0497: EVAP system purge flow

DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P145C EVAP System Purge Flow Malfunction
      

1.
DTC check:

DTC check
?1.
Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

?2.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
Freeze Frame
P0496 EVAP System High Purge Flow Detected
      
P0497 EVAP System Low Purge Flow Detected
      
P145C EVAP System Purge Flow Malfunction
      

Are DTC P0496 or P0497 and P145C indicated at the same time?

     
YES
     
     
     
Go to the indicated DTC's troubleshooting.?
     
NO